Setting up the Radio Bridge

You’ve just received your ActiveComms Radio Bridge Connector Box and need instructions getting it setup.

Included in the box

  • Radio Bridge

  • Radio Adapter

  • Power Cord


  1. Attach the included radio adapter to the radio

  2. Plug the radio adapter into “input 1” on the ActiveComms Radio Bridge

  3. Plug an ethernet cable from your router into the "LAN" port on the back of the Radio Bridge

  4. Plug the power cord into the Radio Bridge

  5. After 10 seconds the red light should appear and after 40 seconds the splash screen should appear (Ensure there is a solid yellow light next to the LAN Ethernet cable)

  6. Wait for the splash screen to disappear (can take up to 2 minutes)